ANR-1000 - Using headset microphone with wired connection

ANR-1000 - Using headset microphone with wired connection

Problem/Question

This document clarifies ambiguous documentation regarding use of headset micrphone in wired connection scenario.

Detail
The headset is supplied with a 3 conductor aux cable but the manual does not make if clear if the microphone will work in this mode.

Resolution

  • The Andrea ANR-1000 headset will support use of the microphone using the supplied mini jack cable.
  • However it will only work if the headset is powered on to do this.
  • Due to the above the headset must be charged in order for wired connection to work.

    • Related Articles

    • JAWS – Bluetooth headset connection drops whilst using JAWS

      Problem When using a connected Bluetooth headset with JAWS connection to the headset may drop. Resolution Bluetooth connection may be lost due to either the Bluetooth adapter or headset going to sleep to conserve battery power; a setting in JAWS can ...

    • Index V4 - Network setup (wired ethernet)

      Information An Index V4 embosser may be put on the netowkr using ethernet connection using the steps below. Connect to network IP address (DHCP) Connect the V4 embosser to your network. If the network supports Dynamic Host Configuration Protocol ...

    • The microphone in one or more apps is not working

      Problem When using apps like Microsoft Teams or Zoom the other participants are unable to hear you. Resolution There are two potential causes of this condition that are readily fixed. • Windows microphone privacy settings need attention. • The app ...

    • Connecting a bluetooth headset to the SmartVision2

      To do this, you must activate the Bluetooth connection: in Settings, activate Bluetooth and open Bluetooth to detect all devices in the vicinity. Select the model of the headset you want to connect and press "OK" to pair and then enter the pin code ...

    • Set up JAWS with Focus Braille using bluetooth connection

      Problem You wish to use the Focus Blue fifth generation over a Bluetooth wireless connection with JAWS. Requirements: Focus Blue V Braille display Built in or external bluetooth adaptor JAWS Resolution This process occurs in two stages, the first of ...