Envision – Attach Envision to glasses frame

Envision – Attach Envision to glasses frame

Problem

A user has Envision and needs to attach the main unit to glasses frame.

Applies to

  1. Envision glasses

Resolution

The glasses frames and the envision camera body are packed separately, they must be attached to one another before using Envision product.
 
  1. Find a flat surface to work on such as a table.
  2. Lay out the frames on the table left side, and the Envision camera body next to it on the right.
  3. Unfold the left arm of the frame and lay it on the table with the nose bridge facing away resting on the table.
  4. Then unfold the Envision camera body so that the camera (short end) is folded away from the long arm nearest.
  5. On the frame locate the circular pin to the right of the nose bridge.
  6. On the Envision camera body locate the metal button near where the camera folds out from the arm.
  7. Then bring the pin on the frame and place it over the top of the metal button on the envision camera body. 
  8. Whilst holding the two together, rotate the frame clockwise until you notice a soft click.  This will indicate that the two parts are locked together.

Further information:

Some customers may wish to consult the following resources:
  1. Video demonstration of attaching frame to body unit
  2. Envision Online User Guide