HP 2710 AIO hard reset procedure

HP 2710 AIO hard reset procedure

Problem:

If your HP 2710 all in one printer is not operating correctly or appears not to work at all try using a hard reset to restore it to full operation.

Resolution:

  1. Remove the power cable from the printer when it is turned on.
  2. Press and hold the power button for 30secs.
  3. Connect the power cable to the printer and directly to the wall outlet.
  4. Turn on the printer.

    • Related Articles

    • Laptop & Desktop - Static discharge reset procedure

      Problem A laptop does not appear to start up or does not appear to charge when plugged into mains. Resolution In normal use a static charge may develop that prevent the laptop electronics from receiving power. Typically when this happens no lights ...

    • Medion - Akoya 15407 static discharge reset

      Problem This document contains potential solutions for two related power/charging problems that may occurr: • The laptop does not power on at all, no charge/power indicator lights are shown when the power adaptor is plugged in. • The laptop fails to ...

    • Mountbatten - Reset procedure

      Problem A Mountbatten is not working as expected, a reset may fix the problem. Applies to Mountbatten Mountbatten Whisperer Resolution Use the methods below to carry out Mountbatten resets. Warning! This procedure is not applicable to the Mountbatten ...

    • Obtaining battery cycle count information on HP laptops

      Problem: The laptop has abnormally low battery performance in use or cuts out almost instantly when disconnected from mains power. Resolution: To resolve this issue it may be useful to check the battery cycle count information. Within the first year ...

    • Sense Notetaker troubleshooting guide

      HIIMS International Corporation Technical Support Guide Line Trouble Shooting Guide (For the Sense Notetakers) ENGLISH Version (January, 2011) HIMS International Corporation 139-9, Gajung-dong, Yuseong-gu, Daejeon, Korea 305-350 Phone: ...