MB Tutor – Check firmware version

MB Tutor – Check firmware version


Problem

Before updating a customer may wish to check the current firmware version installed on their MB Tutor.

 

Resolution

Path:  Menu > System > Device Information.

 

1.    Power on the With MB Tutor.

2.    Press MENU button.

3.    Then use the arrow keys to navigate to System and press OK.

4.    Then navigate to Device Information and press OK.

 

Information regarding serial number, firmware version and bootloader will be displayed

    • Related Articles

    • MB Tutor - Update to latest firmware

      Problem A customer needs to update firmware installed on their Harpo Mountbatten Tutor to resolve technical issues. Note Current MB Tutor firmware version 1.7.5. Resolution Please use the steps below to update to the most current MB Tutor firmware. ...
    • Mountbatten Tutor – Check firmware version

      Information The Mountbatten runs on internal software which is periodically updated. It is a common troubleshooting step to check what version is running and check if an update is available. Steps Checking the firmware version on the unit. Press Menu ...
    • MB Tutor - Firmware update change log (version 1.7.3)

      Information Below MB Tutor firmware change log information as of version 1.73. Note This version has been superseded by 1.7.5. Warning! Whilst updating MB Tutor please do not touch any keys or knobs. 1.7.3 (2023-04-26) Higher precision computation on ...
    • Mountbatten - Check firmware version

      Problem In the course of troubleshooting problems with a MOuntbatten or Mountbatten Whisper you need to establish the firmware version running on the affected unit. Steps Command mode must be enabled, to enable it press newline + space + tab + ...
    • Check Braille Edge 40 Firmware version

      Information Use the steps below to check Braille Edge 40 firmware version. From the Main Menu, use the SPACEBAR repeatedly until you get to “Information”. Press “ENTER” to open this screen. Press “SPACE-DOT 4” twice. This will display the version and ...