Mountbatten Whisperer Bluetooth not connecting

Mountbatten Whisperer Bluetooth not connecting

Problem

Trying to pair MB Whisperer to a Bluetooth device such as an iPad but you get an error to saying "Not Connected".


Resolution

Paper must be loaded for the Bluetooth to connect.


    • Related Articles

    • Connecting a bluetooth headset to the SmartVision2

      To do this, you must activate the Bluetooth connection: in Settings, activate Bluetooth and open Bluetooth to detect all devices in the vicinity. Select the model of the headset you want to connect and press "OK" to pair and then enter the pin code ...

    • Mountbatten – Set up for use with MBComm accessory

      Information MBComm is a Mountbatten accessory designed to facilitate communicate between a Mountbatten and Windows computer for file transfer etc. Requirements • MBComm software and USB driver CD (two installers) • Windows PC/laptop with USB port. ...

    • Changing/increasing dot impact on a Mountbatten Whisperer

      Information If dots embossed by the Mountbatten Whisper you can increase the impact force to produce a more prominent dot on paper. Steps Enable command mode if it is not already turned on by pressing the following keys together back tab + forward ...

    • QBraille XL Initial Bluetooth connection (Windows 10)

      Information: This document covers your initial connection of your QBraille XL to a Windows 10 computer with JAWS using a Bluetooth connection. Although these instructions are for Windows 10 and JAWS 2019, these instructions may also work with ...

    • Focus V – Unable to establish Bluetooth connection or ‘unsupported device’ error (IOS)

      Problem A Focus 5th generation user is attempting to pair with an IOS device but during pairing either a message ‘Unsupported device’ or pairing fails for another reason. Resolution This document is intended to address particular Focus connection ...