Focus - Resetting 5th generation Focus Braille displays

Problem:

A customer using a Focus display is that is not working as expected.

Resolution:

A reset procedure is available for units running firmware version 5.81-37 or later.

Warning!

Please note that the reset will erase user settings and Bluetooth pairings existing in the unit.

1. To restore factory defaults press all the following keys together:
   Right Selector, Right Shift, Left Mode Button ( Blue round button on top left).
2. With the above keys held down press and hold the power button until the display reponds by showing an alternating pattern of dots toggling to indicate reset is complete.
3. Release the keys and the unit will reboot and the reset process will be complete..

Note
The below illustration for any sighted non Braillist helpers as guide to relevant keys to press and hold.

• Related Articles

• Focus series V - Restore/reset to factory defaults

  Problem You wish to restore the factory defaults becuase of a problem with the Focus Blue v5 display. Resolution Restore Factory Defaults: Please press and hold the following keys simultaneously: Right Selector, Right Shift, Left Mode Button ( Blue ...

• Restore compact 10 user settings to defaults

  Problem If the Compact 10 starts to behave oddly or settings have been corrupted use the procedure below to restore the unit to factory defaults. Resolution Tap the menu button top left represented by three horizontal lines. Then tap Settings and ...

• SmartReader - Reset to factory defaults

  Problem Smartreader is not operating as expected or customer wishes to return to defaults. Resolution This procedure will reset all user customised settings, saved images, pages and books are not lost when doing this reset. Press Save an Previous ...

• Zoomtext - restore Zoomtext default settings

  Problem Zoomtext is not working properly or settings are corrupted causing unusual behaviour. Resolution Use the steps below to restore ZoomText defaults to fix the problem: Open Zoomtext menu > Configurations > Restore default. Then click Yes on the ...

• Braille Edge 40 resets

  Problem The Braille Edge display is not working as expected and you need to use a reset to fix the problem. Resolution Use each method as aproprirate to attempt to resolve the problem. Method 1 - Reset button Press the “Reset” button on the rear ...