SmartVision 3 - Installing SIM and memory cards

SmartVision 3 - Installing SIM and memory cards

Problem

A SmartVision 3 user needs to install their SIM and memory cards.

Applies to

  1. SmartVision 3

Resolution

The following is taken from the SmartVision 3 user guide.

Lay the phone flat in front of you face up. Insert the tip of the SIM extraction tool supplied with your phone into the SIM tray eject hole on the left side of the phone. Make sure the SIM extraction tool is perpendicular to the hole. Otherwise, the device may be damaged. When inserting the SIM extraction tool into the SIM tray eject hole, do not obstruct the tray to avoid damaging the eject mechanism inside the slot. Push the tip all the way into the hole until the SIM tray pops out and then pull it out.

The SIM tray has two compartments. The first compartment allows you to insert a SIM card or an SD card. The second compartment allows you to insert only a SIM card.

Inserting a single SIM card: position the SIM card with the metal side down, the beveled corner at the bottom right, in one of the two available compartments of the SIM tray. Then gently reinsert the SIM tray all the way into the slot. When reinserting the SIM tray into the phone, make sure it is oriented horizontally so that the SIM cards do not fall out. The tray should be fully inserted and not protrude from the slot or fall out. If the card is not firmly seated in its compartment, the SIM card may be ejected or fall out.

Inserting two SIM cards: position the first SIM card, metal side down, beveled corner at the bottom right, in the first compartment of the SIM tray. Perform the same operation for the second compartment of the SIM tray. Then gently reinsert the SIM tray all the way into the slot. When reinserting the SIM tray into the phone, make sure it is oriented horizontally so that the SIM cards do not fall out. The tray should be fully inserted and not protrude from the slot or fall out.

Good to know: The order of the SIM cards in the tray does not matter. Configuration and management of SIM cards is done via the phone's "Settings" application, "Network and Internet" section.

Inserting an SD card and a SIM card: position the SD card in the first compartment of the tray, metal side down, bevelled corner down. Then position the SIM card in the second compartment of the tray, metal side down, the bevelled corner at the bottom right. Then gently reinsert the SIM tray all the way into the slot. When reinserting the SIM tray into the phone, make sure it is oriented horizontally so that the SD card and SIM card do not fall out. The tray should be fully inserted and did not protrude from the slot.

    • Related Articles

    • SmartVision 3 – Installing SIM card and SD Card

      Information The SmartVision 3 can accommodate a nano SIM card and a micro SD card. Alternatively, it may take a second SIM in place of the Micro SD card. Step 1 – Ejecting the SIM tray Lay the phone in front face up so its bottom side is nearest you. ...
    • Installing an optional micro SD card into Smartvision 2 phone

      Information The Kapsys SmartVision 2 allows for insertion of an optional micro SD card for user data. Below are instructions on how this can be installed by the user. Application Backup data storage Music and other media files Steps If the phone is ...
    • SmartVision 3 - Remove battery

      Problem A SmartVision 3 user wishers to know whether the internal battery can be removed/replaced. Applies to SmartVision 3 Resolution The SmartVision 3 no longer has a user removable battery. Should this part need replacing it must be replaced by ...
    • Importing contacts to the SmartVision2

      By default, contacts on the SIM card are displayed automatically. However, you can import other contacts from the phone's internal memory or from an SD card. To do this, launch the application "Contacts" then press the "Menu" key and finally select ...
    • Smartvision 3 - Reset phone unlock PIN

      Problem A SmartVision 3 customer needs to reset a forgotten phone PIN number for unlocking the SmartVision 3 mobile. Applies to SmartVision 3 Resolution You can unlock doing the following process : What you need A Google account that has been setup ...