Written description of Index V4 control panel

Written description of Index V4 control panel

Problem

You wish to know what the controls of the Index V4 embossers.

Resolution

Written description of buttons for blind users.

On the far left, you have the On and Off buttons, then to the right of those, a Feed and Help button. These are all marked in Braille. If you press the Help button, it will read out information about the embosser including the current paper size.

In the middle you should find a Menu button. To the right of that you should find three arrow buttons - a left, up and down. To the right is an OK button.

On the right, there are three buttons - CHS, 1 and 10. The 1 key will increment a value by one, and the 10 key will increment a value by 10. The CHS key swaps it around, so that the keys will decrement a value instead.

Operation examples

Change the characters per line

  1. Press the menu button first.
  2. Press down arrow until you get to Braille Settings, then press OK.
  3. Press down arrow until you get to Braille Layout, then press OK.
  4. First option in here is characters per line, so just press OK.
  5. Use the 1 and 10 buttons to change the amount. Press OK when you have set it as you need it.
  6. Once you've done, you can press OK. You can then go down to check the other settings such as lines per page.
  7. After you've changed everything, press the menu button again to save and exit the menu.

Change the paper size

  1. Press the menu button first.
  2. Press down arrow until you get to Braille Settings, then press OK.
  3. First option here is Paper size - press OK.
  4. Press OK again to get into Select Paper Size, and then OK again to Set the paper size.
  5. Use up and down arrows to change the size. Press OK when you have set it as you need it.
  6. Afterwards, press the menu button again to save and exit the menu.

    • Related Articles

    • Index V5 – Setting paper settings in Braille Layout menu

      Information The Index embosser must be configured properly for the paper size being used. This is especially important either when changing form one size to another or where using a Braille translator whose settings do not affect output directly. ...

    • Index – adding a user defined paper size

      Problem Some paper sizes will not appear in the list of pre-set sizes when setting the size, it is possible to create a user defined paper size to fix the problem. Steps Press MENU on the control panel of the embosser. The embosser will echo: ...

    • Duxbury setup with Index embossers

      Information Documentation provided by Will on setting up Duxbury DBT and Index embossers. Index embosser setup outline Install/activate Duxbury. Install the Index drivers. Set the paper size on the embosser. Set up the embosser in Duxbury: Select the ...

    • IDB - Using Index Direct Braille

      Problem A customer with an Index V5 embosser wishes to use Index Direct Braille translation software. Detail Index-direct-Braille is a tool to quickly emboss Braille from simple PDF and Word documents if no other Braille translation software is ...

    • Focus – 5th gen 40/80 Braille display controls layout

      Problem A customer needs to know the layout of controls of Focus 5th generation 40/80 displays. Applies to Focus V displays Resolution Please review the information below both Focus 40 and 80 are similar but with the addition of panning rockers on ...