KapX - Initial setup

KapX - Initial setup

Problem

A new KapX user needs to know how to get started with their unit.

Applies to

  1. KapX

Resolution

the following is taken from the user guide.

  1. Position the headset on your head
    Hold the headset with both hands, with the headband facing backward. Place the headband behind your head and position the speakers in front of your ears, directly on your temples. Your ears remain free and uncovered. Adjust the position so that the right side, which integrates the camera, is as horizontal as possible. Check that the headset fits securely; it should not slip during normal head movements. Whenever possible, it is recommended not to wear glasses for better comfort and to avoid obstructing part of the camera’s field of view.
  2. Turn on the headset
    Press and hold the “Minus” button on the headset for 3 seconds, then release it. A welcome sound will confirm that the headset has powered on.
  3. Turn on the control unit
    Press and hold the “Power” button on the control unit for 3 seconds, then release it. A welcome sound will also confirm that the control unit has powered on.
  4. Connect the headset to the control unit
    Wait a few seconds for the headset to automatically connect to the control unit. An audio signal from the headset will confirm that the connection is active.
  5. Adjust the volume Use the “Plus” and “Minus” buttons on the headset or on the control unit to adjust the volume to your preference, depending on the surrounding noise level.

    KapX is now operational, and you can follow its guidance instructions.
    While moving, it is recommended to keep your head upright and aligned with your body to ensure accurate guidance. If the headset or head position is not correct, a voice alert will inform you.

    • Related Articles

    • Minivision 2 - Audio getting started guide

      Problem A Minivision 2 user would like to access an audio getting started guide for the Kapsys SmartVision 2 mobile phone. Resolution Sight & Sound have put together an audio guide to help new Minvision 2 users get started with their phone. A link to ...

    • WeWalk – New users getting started

      Problem A WeWalk customer has received their WeWalk 2 order and wnats information to get started with their new roduct. Applies to WeWalk 2 Resolution WeWalk offer a number of helpful resources for new WeWalk users: Getting Started With Your Smart ...

    • SmartVision 3 – Initial setup

      Problem A SmartVision 3 user has a phone they just received or has just been reset and needs to work through the initial prompts and wizards. Resolution When the SmartVision 3 first starts the user is invited to enroll themselves onto the phone by ...

    • KapX - Parts and controls

      Problem A support technician needs to refer to information regarding the position of controls. Applies to Kapsys KapX Resolution The KapX consists of two main components, the headset with camera and the control unit. Below are details of the parts ...

    • OrCam Learn - Setup

      Problem Am Orcam Learn user is setting up their product for the first time. Applies to Orcam Learn Resolution This document covers setup of OrCam Learn and the companion smartphone app. Charging OrCam Learn Before using OrCam it must be charged. The ...