HP Deskjet 2700 series print speed is slow

HP Deskjet 2700 series print speed is slow

Problem

Printing on HP 2700 series printers is slow.

Affected products
• HP Deskjet 2710
• HP Deskjet 2710e

Resolution

Below resolutions may help improve printe speed.

Method 1: Reset the printer

Reset the printer to recover from printer errors or failures.

  1. With the printer turned on, disconnect the power cord from the printer.
  2. Unplug the power cord from the power source.
  3. Wait 60 seconds.
  4. Reconnect the power cord to a wall outlet and to the printer.
Note

HP recommends plugging the printer directly into a wall outlet.
Turn on the printer to complete the reset.

Method 2: Turn off Quiet Mode (Windows)

Quiet Mode reduces noise levels when printing, but can also reduce print speed.
Quiet Mode is not available for all printers.

  1. Open the HP Smart app, click your printer, click Advanced Settings. On the Settings.
  2. Then tab, click Quiet Mode under Preferences, select Off, and then click Apply.
Note

If prompted for a password or PIN, enter the password previously set by the printer administrator or PIN from the label on your printer. You can find the label on the back of the printer or open the cartridge access door and look inside the printer.
Open Start menu and search Windows for your printer, and then select your printer in the results to open HP Printer Assistant. On the Quiet Mode tab, select Off, and then click Save Setting.

Method 3: Reduce print quality to improve print speed (Windows)

Selecting certain paper types or printing in higher quality can slow print speeds. Print with plain paper in reduced quality for faster print speeds.

  1. Search Windows for printers, and then click Printers & Scanners in the list of results.
  2. Click your printer, and then click Manage > Printing preferences.
  3. Click the Paper or Paper/Quality tab, and then make sure Plain Paper is selected in the Type or Paper type field.
  4. Adjust the print quality.
  5. HP inkjet and LaserJet printers: In the Print Quality field, make sure Draft or Normal is selected.

Method 4: Print with both cartridges

If your printer supports printing with only one cartridge, doing so might reduce print speed.

  1. Open the cartridge access door, and then make sure all cartridges are properly installed.
  2. Check ink levels, and then replace any empty cartridges.
  3. Uninstall HP print driver and use HP Smart (Windows)
  4. Uninstall the HP print driver and install and use HP Smart on a Windows computer.
  5. Disconnect any USB cables from the printer.
  6. In Windows, search for and open Apps and Features
  7. Look for your HP printer name in the list of programs. If you find your printer, click the printer name, and then click Uninstall.
  8. If you do not find your printer, search for and open Printers & scanners, click your printer, and then click Remove device. If a User Account Control message displays, click Yes.
  9. Follow the instructions to complete the software removal, and then restart the computer.
  10. Go to 123.hp.com to download and install HP Smart.

Reference
https://support.hp.com/gb-en/document/ish_2817150-2408088-16