HP - Locate power button on G255 G9 laptop

HP - Locate power button on G255 G9 laptop

Problem

A user with low vision/blindness cannot locate the power button for the laptop.

Applies to

  1. HP G255 G9 laptop

Resolution

For users with vision, the power button is a narrow rectangular button on the left situated just above the QWERTY keyboard on the left side.

Detailed steps

  1. Position the laptop in front of you witrh the lid open, nearest you on the top panel is a centrally locate touchpad for manipulating the mouse pointer.
  2. Behind the touchpad is he QWERRTY keyboard which takes of up the bulk of of top panel.
  3. Behind the QWERTY layout on the extreme left side there is an ESCAPE and F1 key on the top row.
  4. Almost directly above the ESC and F1 keys is a small narrow rectangular button almot flush with the top panel.
  5. Gently depress this button for approximately two seconds to power on the unit.  Assuming the laptop is plugged in or has sufficient battery power, the laptop will then boot into Windows.

    • Related Articles

    • Microsoft – Disable USB power management to fix problems

      Problem A customer has a USB device problem on a Windows laptop/desktop where power management is suspected to be the cause of the problem. Resolution Windows uses power management on connected USB devices, however if this is causing problems it may ...

    • MiniVision 2 - Power on phone

      Problem A customer does not know how to power on the Minivision phone. Applies to Minivision 2 and 2+ Resolution The Minivision 2 does not have a separate power button, instead the phone uses the Call Release key to power the unit on if it is shut ...

    • Laptop HP - Run component hardware tests (UEFI)

      Problem An HP laptop is suspected of having problems with hardware and you wish to run hardware diagnostics independantly of Windows to identify the problem. Applies to Laptop - HP Resolution Note This document assumes UEFI diagnostics are already ...

    • HP 2710 AIO hard reset procedure

      Problem: If your HP 2710 all in one printer is not operating correctly or appears not to work at all try using a hard reset to restore it to full operation. Resolution: Remove the power cable from the printer when it is turned on. Press and hold the ...

    • HP Probook boot error 3F0

      Problem When starting an HP Probook laptop you see a message indicating that there has been a boot error with code 3F0 displayed on screen. Models which may be affected HP Probook 440 G6 Note It is likely that other Probook models can be treated in a ...