When the Index embosser attempts to feed the loaded paper slips between the rollers rather than being properly gripped.
Resolution
This task should be undertaken with some care and in some cases may not be sufficient to fix the problem. Below is video guide how to accomplish the task:
You should use a platen cleaning agent such as that linked below:
Problem When embossing with Index Everest embossers the paper feed rollers or sheet feeder is not operating correctly. Applies to Index Everest V4 and V5 Resolution The following are areas to check if there are problems with paper feeding on the ...
Problem A customer has an Index Everest D V5 embosser that is experiencing problems with paper feed. Resolution Please observe the following recommendations to help avoid problems with paper feeding: Please use good copy paper quality with minimum ...
Problem: You are having paper feed issues with an Index Everest embosser. Affected products: Index Everest Resolution: If the sheet feeder of the Index Everest is not feeding correctly, please check the following. Please use good copy paper quality ...
Problem There are problems with paper not feeding at all or being fed but causing paper jam. Resolution Check that printer is turned on. Press the OK button. Select Maintenance. Select Roller cleaning. When the confirmation screen will appears select ...
Problem: If your Canon printer is failing to pick up paper or is constantly getting paper jammed inside you can use a roller clean to see if this helps. Applies to: TS-6200 series Reolution: Check printer is on and select "Setup" on the home screen. ...