Performing roller clean to fix paper feed issues
Problem:
If your Canon printer is failing to pick up paper or is constantly getting paper jammed inside you can use a roller clean to see if this helps.
Applies to:
TS-6200 series
Reolution:
- Check printer is on and select "Setup" on the home screen.
- Now select "Maintenance" and then "roller cleaning".
- Then select "yes" and select "rear tray" or "Cassette" for paper source.
- Follow the instruction to remove any paper from either the rear tray or front paper cassette.
- Then select OK for it to proceed.
- When the roller has stopped rotating respond to the message to load three sheets only and then select "OK".
- The roller clean we be completed once paper is ejected, you can then select OK.
Note:
For additional information on proper paper handling please consult printer documentation for guidance.
Related Articles
TS-6350 roller clean
Problem There are problems with paper not feeding at all or being fed but causing paper jam. Resolution Check that printer is turned on. Press the OK button. Select Maintenance. Select Roller cleaning. When the confirmation screen will appears select ...
Index - Everest V4/V5 paper feed issues
Problem When embossing with Index Everest embossers the paper feed rollers or sheet feeder is not operating correctly. Applies to Index Everest V4 and V5 Resolution The following are areas to check if there are problems with paper feeding on the ...
Paper jams (Canon printers)
Problem You have a paper jam with a Canon printer. Resolution Please find links below to a selection of videos that will assist with removing paper jams from your printer. Removing jammed paper: paper output slot Remove paper jam from inside the ...
HP 2710/e - Paper does not feed
Problem When using an HP Deskkjet 2710 the paper feed rollers are not feeding paper properly. Affected products HP Deskjet 2710 HP Deskjet 2710e Resolution The rollers just inside the rear paper tray help feed paper into the printer mechanism. If ...
Index V4 paper feed/paper jam problems
Problem A customer is experiencing a paper feed or paper jam issue with Index V4 embosser. Affected products Index V4 Basic D Index Everest V4 Resolution This problem may be due to the optical paper sensors being obscured (usually by paper debris). ...