PIAF – Guidance on using Zychem swell paper to make tactile documents

PIAF – Guidance on using Zychem swell paper to make tactile documents

Problem

A PIAF user requires guidance on creating tactile images on swell paper for use with the PIAF machine.


Applies to

  1. PIAF (Harpo) 


Resolution

Please see the recommendations below.

  1. Printed images must be in black ink to be made tactile.  Colour does not normally work.
  2. You can either use a inkjet printer or photocopier with the paper, be careful to make sure that the correct side of the media is used.
  3. After printing avoid touching the paper and allow to dry for at least 10 minutes before handling and putting through PIAF machine. 

Further information


    • Related Articles

    • PIAF - Product information

      About PIAF, short for Picture In A Flash is a tactile graphics solution. It works by allowing one to draw an image onto special paper which when fed through PIAF with an image drawn onto it with a special pen will create a tactile version of the ...
    • JAWS - Make a documents folder shortcut for the windows desktop

      Problem You wish to create s shortcut to Documents folder on the desktop. Resolution Press WINDOWS+D to move to desktop and then use first letter navigation or arrow keys to locate "This PC" and press ENTER. Use first letter navigation or arrow keys ...
    • ZoomText - Reading Adobe PDF documents with ZoomText AppReader

      Problem A ZoomText customer is presented with a PDF document file they need to read with ZoomText speech. Note Some set up may be required please see the following: • Make Adobe Reader default viewer for PDF documents • Configure Adobe for use with ...
    • Viewplus - Clear SpotDot paper jams

      Problem A SpotDot embosser has a paper jam alert. Resolution Paper jams can occur in the main body of the embossing printer or in the rear paper path extender. To check and clear paper jams please follow the steps below. Note: Always pull the paper ...
    • Performing roller clean to fix paper feed issues

      Problem: If your Canon printer is failing to pick up paper or is constantly getting paper jammed inside you can use a roller clean to see if this helps. Applies to: TS-6200 series Reolution: Check printer is on and select "Setup" on the home screen. ...